CNC Wood Burner Machine for HOME BUSINESS. Burned Pictures From Photo

Description

CNC Pyrography Machine PyroPrinter -
Make your Home Business!
Our team of engineers from Europe spent 2 years and over 10,000 hours of tests to create PyroPrinter!
This machine creates portraits and images of the same quality as the work of a professional artist! This machine creates highly detailed paintings. You can see the iris of the eye in the portrait. With PyroPrinter You will be able to create exclusive gifts for your friends, and also to open a
small home business
! You do with business  in your free time without leaving work.
PyroPrinter
is a professional CNC machine for burning images and portraits on the wooden surface.
Burning time of one A4 portrait — is about 3 hours (time is dependent on how dark the photo is). Raster images are used to create burning patterns by PyroPrinter's software (line by line). Shading is produced by the nichrome wire's velocity. To produce a photo gradient, PyroPrinter's software selects a desired speed based on the darkness in the photograph. The dark elements of the pattern move at a slower speed, and light patterns move more quickly.
Without additional set-up PyroPrinter CNC works with wood surfaces from 1 to 10 mm thick.
PyroPrinter CNC is equipped with a proximity sensor that monitors off-normal conditions, to prevent fire.
In order to make a portrait, it is necessary to prepare the picture — convert a photo into a gray color and increase the brightness and contrast, and sharpen the image. Then just upload the original photo in the CNC software. Everything else CNC machine PyroPrinter makes itself.
Using the program is VERY easy!
You just need to upload  .bmp picture in the program and press Start!
Free shipping by avia (12-23 days)!
Quality of portraits is similar to quality of professional artwork!
Portraits burned on the wood
(Pyroprint) as a gift
Burned portraits on the wood surface — is a new eco-friendly gift that is in demand. Your friends do not have portrait like Pyroprint before for sure! Exclusive portrait on the tree absolutely impress anyone, because these portraits look as if was made by professional artist.
People love things made for them personally. Exclusive personalized things are often becomes significant for the person. This gift will certainly not go into the pantry.
Pyroprint (portraits on the wood) as a business
Pay back period of the purchase of CNC wood burner is about 1.5-2.5 months
Investments
— about $ 1,100
Cost of the portrait
— -
Profit per month
— 0-00
You can make portraits and sell them via the internet (social networks, Instagram, Pinterest, Etsy, websites of Handmaid, etc.), as well as you can find partners who will offer your products. You can suggest partnership for wedding agencies, photographers (who make the photo sessions) or advertising agencies.
This small home business will not makes you a millionaire, but you can increase your income up to several thousand dollars per month making small orders in your spare time.
Process of portrait making does not require a lot of time and you can combine it with the your job. To make 1 portrait you need to configure the program for 20 minutes, start the burning process. You do not need to control process during all time. You can make portraits after work in the evenings or on weekends.
Nowadays, very few studios do these portraits. You can have time to take a free niche buying a CNC wood burner today. You will have enough time to establish yourself on the market, find partners and gain your portfolio.
Comparing PyroPrinter with laser engraver
Halftones
The main drawback of laser CNC burner is the inability to make a halftone for a image. The laser draws either a black dot or not draws a dot at all. Any artist knows that the effect of the volume image is achieved by the shadows on the face. Shadows create objects volume, make it “alive”. The human brain recognizes the person in the image is largely due to the drawn shadows on the face. Laser CNC engraver creates the shadow by decreasing the density of black dots.
That is, instead of the 5 grey dots, the CNC will draw 2 black dots and 3 dots it misses. That is,
instead of the five gray dots laser will draw 2 black dots and 3 dots it misses
.  PyroPrinter draws the image without lifting a hot nichrome sting (wire), and changes the time of contact with the wooden surface. If the hot tip is moving fast, the contact time will be minimal. As a result, we get a light tone. If sting will move slowly, the hot soldering iron tip will take longer to touch the wood. So we get black. Because of the large speed range
PyroPrinter creates a large range of shades.
Speed of burning
Laser CNC burns at a rate of 10 points per second. Thus, a picture size 20*20 cm we burned 10 hours. In this case, the image was quite bright.
PyroPrinter burns formats with the following speed:
- A4 format - 1.5-2.5 hours
- A3 format - 3.5-5 hours
- A2 format - 7-9 hours
Bright glow from the laser
The illumination from a laser reminiscent of the glow from the welding machine. The laser can significantly degrade a person's vision. Way to protect from bright light – it specialized glasses. But it is not always possible to choose correctly to each laser with a different wavelength correspond to different laser glasses that protect from this range of the laser. If you have children and you want to put home laser, it's just unthinkable!
Pyroprinter has no harmful illumination.
Portraits made on Pyroprinter
What you can make with Pyroprinter
1. Portraits, pictures and panels on wooden surface
2. Pictures on leather
3. Clock
4. Pictures on the wooden phone covers
5. Icons
Technical information
- Working area of CNC — 420*440 mm (16.5*17.3 inches) - this is A5, A4 and A3 formats. One dimension is possible to increase up to 900 mm - working area will be 420*900mm (16.5*35 inches) - formats A5, A4, A3, A2 + panels (90*40 cm)
- Operates by OS Windows XP, 7,  8, 10 via USB port
- SoftWare for CNC— Pyroprinter Soft
- Size of the CNC 75*75 cm (30*30 inches)
- Electricity: switch 220V/110V
- CNC automatically turns on before work and it is turned off after the end, it regulates the heat of the burn wire
Note: PC does not include in price. SoftWare works only with Windows!
Burning time of one A4 portrait — is about 1.5-2 hours (time depends on the dark volume of the surface). Burning pattern is raster (line by line), shades are due to velocity. For each color CNC selects the desired speed, so the dark elements of the pattern is moving at a slower speed, and light patterns — on the rise speed.
Without additional set-up CNC works with wooden surfaces from 4 to 10 mm thin. But you can increase height by adding extra wooden pieces under studs.
CNC PyroPrinter equipped with a proximity sensor that will monitor non-standard situation, and if they occur PyroPrinter will be disabled. This reduces the likelihood of a fire to zero.
Additional information watch on our website:
pyroprint.com