-40%
Cnc Z-Achse einstellen Tastplatten- Probe Engraving Router Milling Machine Tools
$ 2.32
- Description
- Size Guide
Description
HomeModules
Sensor
Arduino
Raspberry Pi
3D Printer
Chips
Cnc Z-Achse einstellen Tastplatten- Probe Engraving Router Milling Machine Tools
Description:
100% Brand new and high quality。
CNC Z-Axis Tool Setting Touch Plate Probe Mach3 Router Mill.
CNC Router Engraving MACH3 Machine Tool Setting Auto-Check
Instrument 35mm Dia.
Cnc Z Axis Router Mill Touch Plate Mach3 Tool Setting Probe New Milling Hot Kit. Diameter:(Approx.) 35mm
Height:(Approx.) 20mm
Effective surface of the knife: 25mm diameter
Cable length 1.2 m , diameter 0.2 square feet,
Including alligator clips
connect the wire of this tool check insturment to the tool connector
of your
Control board of the machine , then the control board's GND
connect to the frame
of your router ( the frame of the router and the spindle must have
connections)
two ways to connect this item:
if your interface board has the limit switch port or other probe
port, you can
connect it to that port
if your interface board does not have that port, your driver board
has that port,
you can connect it to the driver board's limit switch port.
then in the Mach 3, you need to setup the probe(Mach3 --- Config--
-Ports and
Pins---Input signals Probe enabled , the pin number type the one
you use) and the
Package Included:
1 x CNC router engraving machine Tool
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.